Screenprinting, silkscreening, or serigraphy is a printmaking technique that creates a sharp-edged image using a stencil. A screenprint or serigraph is an image created using this technique.It began as an industrial technology, and was adopted by American graphic artists in the early 1900s. It is currently popular both in fine arts and in commercial printing, where it is commonly used to print images on T-shirts, hats, CDs, DVDs, ceramics, glass, polyethylene, polypropylene, paper, metals, and wood. The Printer's National Environmental Assistance Center says "Screen printing is arguably the most versatile of all printing processes."[1] Since rudimentary screen-printing materials are so affordable and readily available, it has been used frequently in underground settings and subcultures, and the non-professional look of such DIY culture screen prints has become a significant cultural aesthetic seen on movie posters, record album covers, flyers, shirts, commercial fonts in advertising, and elsewhere.
Graphic screenprinting is widely used today to create many mass or large batch produced graphics, such as posters or display stands. Full color prints can be created by printing in CMYK (cyan, magenta, yellow and black). Screenprinting is often preferred over other processes such as dye sublimation or inkjet printing because of its low cost and ability to print on many types of media.
Printing technique:
A screen is made of a piece of porous, finely woven fabric (originally silk, but typically made of polyester since the 1940s) stretched over a frame of aluminum or wood. Areas of the screen are blocked off with a non-permeable material to form a stencil, which is a positive of the image to be printed; that is, the open spaces are where the ink will appear.
The screen is placed atop a substrate such as paper or fabric. Ink is placed on top of the screen, and a fill bar (also known as a floodbar) is used to fill the mesh openings with ink. The operator begins with the fill bar at the rear of the screen and behind a reservoir of ink. The operator lifts the screen to prevent contact with the substrate and then using a slight amount of downward force pulls the fill bar to the front of the screen . This effectively fills the mesh openings with ink and moves the ink reservoir to the front of the screen. the operator then uses a squeegee (rubber blade) to move the mesh down to the substrate and pushes the squeegee to the rear of the screen. The ink that is in the mesh opening is transferred by capillary action to the substrate in a controlled and prescribed amount, i.e. the wet ink deposit is equal to the thickness of the stencil. As the squeegee moves toward the rear of the screen the tension of the mesh pulls the mesh up away from the substrate leaving the ink upon the substrate surface.
Screen print method:
There are three types of screen printing presses. The 'flat-bed' (probably the most widely used), 'cylinder', and 'rotary'.[2]
Textile items are printed in multi-color designs using a wet on wet technique, while graphic items are allowed to dry between colors that are then printed with another screen and often in a different color.
The screen can be re-used after cleaning. However if the design is no longer needed, then the screen can be "reclaimed", that is cleared of all emulsion and used again. The reclaiming process involves removing the ink from the screen then spraying on stencil remover to remove all emulsion. Stencil removers come in the form of liquids, gels, or powders. The powdered types have to be mixed with water before use, and so can be considered to belong to the liquid category. After applying the stencil remover the emulsion must be washed out using a pressure washer.
Most screens are ready for recoating at this stage, but sometimes screens will have to undergo a further step in the reclaiming process called dehazing. This additional step removes haze or ghost images left behind in the screen once the stencil has been removed. These hangers-on tend to faintly outline the open areas of previous stencils, hence the name ghosts. They are the result of ink residue trapped in the mesh, often in the knuckles of the mesh, those points where threads overlap. [3]
While the public thinks of garments in conjunction with screen printing, the technique is used on tens of thousands of items, decals, clock and watch faces, and many more products.
Plastisol – the most common plastisol based print used in garment decoration. Good colour opacity onto dark garments, clear graphic detail, with as the name suggests, a more plasticized texture. This print can be made softer with special additives or heavier by adding extra layers of ink.
Water Based inks – these penetrate the fabric more than the plastisol inks and create a much softer feel. Ideal for printing darker inks onto lighter coloured garments. Also useful for larger area prints where texture is important.
Discharge inks – used to print lighter colours onto dark background fabrics, they work by removing the dye in the garment – this means they leave a much softer texture. They are less graphic in nature than plastisol inks, and exact colours are difficult to control, but especially good for distressed and vintage prints.
Foil – is what you would imagine. A glue is printed onto the fabric and then foils applied for a mirror finish.
Glitter/Shimmer – silver flakes are suspended in a plastisol ink to create this sparkle effect. Usually available in gold or silver but can be mixed to make most colours.
Metallic – similar to glitter, but smaller particles suspended in the ink.
Expanding ink (puff) - an additive to plastisol inks which raises the print off the garment, creating a 3D feel.
Caviar beads – again a glue is printed in the shape of the design, to which small plastic beads are then applied – works well with solid block areas creating an interesting tactile surface.
Four colour process – artwork is created using dots (CMYK) which combine to create the full spectrum of colours needed for photographic prints – this means an infinite number of colours can be printed using only 4 screens, making the set-up costs viable. The inks are required to blend and are more translucent, meaning a compromise with vibrancy of colour.
Gloss – a clear base laid over plastisol inks to create a shiny finish.
Nylobond – a special ink additive for printing onto technical or waterproof fabrics.
Mirrored silver - Another solvent based ink but you can almost see your face in it.
Versatility:
Screenprinting is more versatile than traditional printing techniques. The surface does not have to be printed under pressure, unlike etching or lithography, and it does not have to be planar. Screenprinting inks can be used to work with a variety of materials, such as textiles, ceramics, wood, paper, glass, metal, and plastic. As a result, screen printing is used in many different industries, from clothing to product labels to circuit board printing.
